LIGHT DUTY

MEDIUM DUTY

HEAVY DUTY

Hollow Core

FRAMEWORK: Single rails and stiles (kin-dried softwood) with a lockblock and hingeblock on opposite sides.

CORE: Honey comb kraft paper 38mm

EDGES: Supplied with or without concealed edges.

MASS: + 15kg

FACING: Veneered, foiled or hardboard.

APPLICATIONS: Mainly domestic.

Semi-Solid

FRAMEWORK: Double rails, double stiles and an extra lockblock on both sides (klin-dried softwood)).

CORE: Honeycomb kraft paper 25mm, or spaced particleboard.

EDGES: 2x8mm verticle concealed edges.

MASS: + 22kg, or 35kg

FACING: Hardboard or veneered

APPLICATIONS: Domestic, commercial and institutional use.

Solid Core

FRAMEWORK:

Double rails and stiles (Kiln-dried softwood).

CORE: Solid particleboard.

MASS: +45KG

FACING: Hardboard or veneered

APPLICATIONS: Domestic, commercial and institutional use

Before finishing the doors must be clean, dry and dust free. Handling marks or effects of exposure should be sanded away lightly, only in the direction of the grain. It is imperative that all six sides be sealed.

The sizes and tolerances shown are for our standard range. Purpose made doors are made on request.

Store doors on a flat, dry surface away from direct sunlight or exposure to weather. Doors should be handled with clean hands and should not be dragged across another as this could cause scratches on the face of the doors.

Do not impair the structural of the door when fitting hardware and ironmongery or whilst hanging the door.

Do not trim more than 10mm off the stile of an exposed edge door or 3mm of a concealed edge door. Do not trim more than 10mm off the top and bottom rail.